Freakier Firmware

Arturia MicroFreak · unofficial

MicroFreak

Hybrid synthesizer · 25 touch keys

Where the lab started. Play a 3D MicroFreak in your browser with stock and SuperFreaker firmware, and learn every new feature hands-on before it goes anywhere near your synth.

SuperFreaker

SuperFreaker, an unofficial mod for the Arturia MicroFreak. It adds effects, controls and shortcuts to the official firmware, one small patch at a time. It comes as one build with everything, plus SuperFreaker + Loud if you want more level.

Open beta, out now, and free. Pick SuperFreaker, or SuperFreaker + Loud. Open the patcher, drop in your own official firmware and download your build. It's tested on our own MicroFreak and by other people on theirs, and we rehearsed the recovery guide before release: it shows how to go back to the official firmware any time. You can try every feature in the simulator too.

Not sure which? Take SuperFreaker. Pick SuperFreaker + Loud if your MicroFreak sounds quiet next to your other gear.

Works with this official firmware

  • SuperFreakerMicroFreak 5.0.0.2084✅ Works
  • Preset GeneratorMicroFreak 5.0.0.2084✅ Works

Don't update your MicroFreak's firmware to a newer version until the compatibility table lists it as ✅ works or 🧪 in beta. A new official version can arrive before we've made the mod work on it. Keep your own copy of the official firmware file you're running now. Already updated? The recovery guide shows how to go back.

What's in it

Mono only: Legato Glide and the Tape echo (Echo, Reverb, Reverse and Hold, with Feedback and Tape Wobble) work in mono mode only. They do nothing when Paraphonic (the mode that plays up to four notes at once) is on.

SuperFreaker

Everything in one build: the controls and shortcuts, Drive, Lo-Fi, the tape echo and the rest of the sound engine additions. Free, and open to everyone.

  • Separate ReleaseThe envelope gets a release of its own, so short notes can still ring out. Zero follows Decay, like stock. Shift + Decay/Release. Try it →
  • Legato GlideNotes glide only when you play over a held one. Mono only: not in Paraphonic. Shift + Glide, past the middle. Try it →
  • Value readoutsThe screen shows the value while you Shift + turn, including Release and Legato Glide. Shift + any knob above. Try it →
  • Preset Volume and preset jumpEach preset keeps its own loudness, and the Preset knob can jump ten presets at a time. Shift + Volume; Shift + Preset knob. Try it →
  • TransposeMove the keyboard in semitones. Shift + Octave up/down. Try it →
  • Shift latchDouble-tap Shift to hold it down for you. One more tap lets go. Shift, twice. Try it →
  • Sequencer shortcutsSequence length, gate length, Smooth and track select without menu diving. Shift + Matrix knob, Shift + Filter Amount, Shift + Random/Rec and Pattern/Play.
  • MIDI extrasCC 7 sets the volume until you touch the knob. CC 123 releases held notes; CC 120 also lets go of Hold. CC 72 and 68 reach Release and Legato Glide. From any MIDI controller or DAW. Try it →
  • Ignore Program ChangeStop a DAW or sequencer from switching your preset. Ignores bank select too. Utility › Global › MIDI › Ignore Prog Chg. Try it →
  • Ignore MIDI StartFollow an external clock without the arpeggiator or sequencer restarting every time it starts. Clock and Stop still work. Utility › Global › Sync › Ignore MIDI Start. Try it →
  • Room to growUnder-the-hood changes. Nothing to play. Always included.
  • RandomizerRolls a new sound: oscillator, filter, both envelopes, LFO and Glide. Volume, the arp, the sequencer and the effects stay as they are. There is no undo, so save a sound you like. New in 0.1.2. Shift + Amp Mod.
  • Drive and Lo-FiTwo new effects inside the engine, saved with the preset and off at zero. They sit before the filter, so Cutoff and Resonance shape them. Shift + Resonance for Drive, Shift + Cutoff for Lo-Fi. Try it →
  • Noise and TremoloBlend in noise, or let the LFO pulse the loudness. Shift + Sustain for Noise, Shift + LFO Rate for Tremolo. Try it →
  • Tape echoEcho, Reverb, Reverse and Hold modes, with Feedback, Tape Wobble and Echo Sync. Turn Echo Time and the repeats glide like a tape echo's instead of stopping and restarting; four glide modes (OFF, GENTLE, MEDIUM, WILD). Mono only: not in Paraphonic. It sits after the filter and amp, so Cutoff does not shape the repeats. Shift + the cycling envelope's Amount knob for Echo Mix, Shift + its Hold/Sustain knob for Echo Time, Shift + its Mode button for the glide; menu lines under Utility › Preset. Try it →
  • WavefolderFolds the wave back on itself for brighter, rougher tones. Shift + Attack. Try it →
  • Sub OctaveAdds a square wave an octave down. Utility › Preset › Voice. Try it →
  • Shortcuts for the aboveStep Sub Octave, Echo Mode and Echo Feedback without the menu. Shift + Spice, Dice and Bend.
  • Boot textSUPERFREAKER and the version on the boot screen, so you know the mod is on the synth. Shows at power-on.

SuperFreaker + Loud

The same build with about 7 dB more level. Pick SuperFreaker + Loud in the patcher if you want it, or leave it out.

  • Louder output (about 7 dB)The headphones and the main output both get about 7 dB more level. Always on in this build.

Both builds are made for MicroFreak firmware 5.0.0.2084, and both are free. Tips from people who like what we make help keep the lab going.

How it works

  1. 01

    Back up

    Save your presets, samples and wavetables in Arturia MIDI Control Center, and keep your own copy of the official firmware file.

  2. 02

    Bring the official firmware

    You supply the file: get it from Arturia's MicroFreak support page, or use the copy MIDI Control Center keeps. The patcher checks it is exactly 5.0.0.2084 before it changes a byte.

  3. 03

    Pick your build

    The patcher runs in your browser on a desktop computer. Your firmware file is never uploaded.

  4. 04

    Flash it

    Load the result with MIDI Control Center's force upgrade (its option to install a file it doesn't recognise). Going back is the same step with the official file.

Tools

Free tools for the MicroFreak. They run in your browser, and your files never leave your computer.

Preset Generator

Live

Roll new MicroFreak sounds that use every knob and every mod-matrix route, Original or SuperFreaker. Hear them on the 3D model, play them from a MIDI keyboard, and send them straight into your synth's preset slots over USB.

Writing to the synth needs Chrome or Edge on a desktop. Back up a slot first; the tool does it for you.

Explore & Learn

An exploded 3D MicroFreak that plays. Switch between stock and SuperFreaker firmware, play it with the mouse or a MIDI keyboard, record it, and watch the scope.

MicroFreak simulator3D · 561 KB · loads on click

The simulator runs the sound engine in your browser. It isn’t Arturia’s code: it’s a model written from the manual and from playing the real synth, close enough to learn the controls on.

Every SuperFreaker feature has a lesson. Each step lights up the control to press on the model and moves on when you’ve done it.

New to the MicroFreak? Learn the MicroFreak has lessons for the original firmware in three tiers, plus a cheat sheet and a glossary.

SuperFreaker lessons

The lessons use the simulator's on-screen controls. For the knobs and buttons to press on your own MicroFreak, see SuperFreaker on the unit.

01Meet SuperFreakerPower on, switch to SuperFreaker 0.1.2, watch it boot, and learn the Shift latch every other lesson uses.2 minStart lesson →02Shift latchDouble-tap Shift to keep it on, one press to let go: turn knobs with a free hand.1 minStart lesson →03Preset Volume and quick browsingShift + Volume sets each preset's own loudness; Shift + Preset jumps ten presets at a time.2 minStart lesson →04Separate ReleaseShift + Decay gives the envelope a release of its own, so short notes can still ring out.3 minStart lesson →05Legato GlideShift + Glide past the middle: notes glide only when you play over a held one, the way 303-style lines want.3 minStart lesson →06TransposeShift + Octave moves the keyboard by semitones, up to a full octave either way.2 minStart lesson →07Sequencer shortcutsShift + Matrix is Sequencer Length, Shift + Filter Amt the gate length, and two touch pads switch Smooth.3 minStart lesson →08Drive and Lo-FiTwo new effects inside the sound engine: Shift + Resonance for Drive, Shift + Cutoff for Lo-Fi.3 minStart lesson →09Noise and TremoloShift + Sustain blends in noise, Shift + LFO Rate makes the LFO pulse the loudness.3 minStart lesson →10Fold and Sub OctaveShift + Attack folds the wave back on itself; Sub Octave adds a square an octave down.3 minStart lesson →11Tape EchoShift + cycling Amount for Echo Mix, Shift + Hold for Echo Time, plus Feedback, Mode and Wobble in the menu.4 minStart lesson →12ReverbEcho Mode Reverb: a plate in the echo's memory. Echo Time is the size, Feedback the decay, Echo Mix the amount.2 minStart lesson →13Shift + Spice, Dice and BendThree touch pads step Sub Octave, Echo Mode and Echo Feedback without opening the menu.2 minStart lesson →14Loud add-onAbout 7 dB more level on the headphones and the main output. Free, optional: the only add-on.1 minStart lesson →15The new Utility linesWhere the global settings live: Ignore Prog Chg and Ignore MIDI Start.2 minStart lesson →16Voice and Modulations linesLegato Glide, Sub Octave and the echo values have lines in Utility › Preset › Voice; Env Release is in Modulations.2 minStart lesson →17MIDI extrasVolume, Release, Legato Glide, All Notes Off and All Sound Off over MIDI. Needs a MIDI controller on the play page.2 minStart lesson →18Model onlyThe matrix, by touchPatch routes without the Matrix knob: click a cell on the readout, wheel or drag for the amount, double-click to clear.2 minStart lesson →19Under the hoodThe patches you cannot play: the ones that make room for the rest.2 minStart lesson →20Echo Glide and Echo SyncShift + Mode sets how a new Echo Time slides, like tape; Echo Sync locks Echo Time to the tempo.3 minStart lesson →21RandomizerShift + Amp Mod rolls a whole new sound. There is no undo, so save the ones you like.2 minStart lesson →